Preliminary Schedule

Wednesday, October 19, 2016

Time Event  
08:00 - 08:30 Welcome reception (Craya Amphitheatre)  
08:30 - 08:45 Opening Ceremony (Craya Amphitheatre) - Pascal Forquin  
08:45 - 09:30 Invited Lecture (Craya Amphitheatre) - Benjamin ERZAR, CEA Gramat (France) ; Pascal FORQUIN, Grenoble Alpes University, 3SR Lab., RV Division (France)  
08:45 - 09:30 › An Improved Computational Constitutive Model for Glass - Timothy Holmquist, Southwest Research Institute  
09:30 - 10:30 Modeling of ceramics at high strain-rates (Craya Amphitheatre) - Benjamin ERZAR, CEA Gramat (France) ; Pascal FORQUIN, Grenoble Alpes University, 3SR Lab., RV Division (France)  
09:30 - 09:50 › Calibrating the Johnson-Holmquist ceramic model for a ceramic under dynamical impact - Maxime Cornière, CEDREM  
09:50 - 10:10 › A Fully Implicit Plasticity Model for the Characterization of Ceramics in Ballistic Protection - Erik Simons, Delft University of Technology  
10:10 - 10:30 › Numerical Investigation of Fracture Processes in an Element-free Galerkin Domain - Paul Warnstedt, University of the Bundeswehr Munich  
10:30 - 11:00 Coffee break and Poster Session (Craya Amphitheatre)  
11:00 - 12:20 Experimental testing of ceramics at high strain-rates (Craya Amphitheatre) - Wayne CHEN, Purdue University (United States) ; Antonio COSCULLUELA, CEA CESTA (FRANCE)  
11:00 - 11:20 › Characterisation of the dynamic compressive behaviour of ceramics using High Pulsed Power technologies - Benjamin Erzar, CEA Gramat  
11:20 - 11:40 › Strain-rate sensitivity of the tensile strength of ceramics: experimental evidences and micromechanical modelling of the fragmentation process activated at very high strain-rates - Jean-Luc Zinszner, CEA Gramat  
11:40 - 12:20 › Brittle-materials at high-loading rates. An open area of research - Pascal Forquin, 3SR-RV division, Univ. Grenoble Alpes  
12:20 - 13:30 Lunch (Galilee Building)  
13:30 - 14:50 Visit of 3SR laboratory - A visit of the facilities of the 3SR laboratory.  
14:50 - 15:30 Ceramics under impact loading (Craya Amphitheatre) - Leslie LAMBERSON, Drexel University (United States) ; Timothy HOLMQUIST, Southwest Research Institute (United States)  
14:50 - 15:10 › A pulse-shaping technique to investigate the behaviour of brittle materials under plate-impact test - Pascal Forquin, 3SR-RV division, Univ. Grenoble Alpes  
15:10 - 15:30 › Hypervelocity impacts into porous graphite: experiments and simulations - David Hebert, CESTA  
15:30 - 16:00 Coffee break and poster session (Craya Amphitheatre)  
16:00 - 17:00 Imaging-based characterization of brittle materials at high strain-rates - Magnus LANGSETH, Norwegian University of Science and Technology (Norway), Dominique SALETTI, Grenoble Alpes University, 3SR Lab., RV Division (France)  
16:00 - 16:20 › Use of micro-tomography to investigate the dynamic fragmentation in ceramics under impact loading - Edward Andò, 3SR, Univ. Grenoble Alpes  
16:20 - 16:40 › Image-Based Dynamic Fracture Analysis of Brittle Polymers - Leslie Lamberson, Drexel University  
16:40 - 17:00 › In-situ observation of fracture processes in high strength concrete and limestone using high speed X-ray phase contrast imaging - Wayne Chen, Purdue University  
17:00 - 18:00 DYMAT General Assembly (Craya Amphitheatre)  
18:00 - 19:30 DYMAT GB 1 - DYMAT Governing Board 1  
18:45 - 20:30 Grenoble City Center Tour - A guided-visit of the city centre of Grenoble. Meeting point : place Saint-André at 18h45.
 

Thursday, October 20, 2016

Time Event  
08:45 - 09:30 Invited Lecture (Craya Amphitheatre) - Jean-Luc HANUS, INSA Centre Val de Loire (France), Benjamin ERZAR, CEA Gramat (France)  
08:45 - 09:30 › Dynamic testing of large concrete specimens with large modified Hopkinson bar apparatuses - George Solomos, European Commission, Joint Research Centre  
09:30 - 10:30 Hopkinson bar testing facility applied to concrete (Craya Amphitheatre) - Yuri PETROV (Russia) ; Jean-Luc HANUS, INSA Centre Val de Loire (France)  
09:30 - 09:50 › Experimental Analysis of the Dynamic Behavior of Concrete in Mode II fracture under Confined Conditions - Reem Abdul Rahman, 3SR-RV division, Univ. Grenoble Alpes  
09:50 - 10:10 › Concrete under Dynamic Multiaxial Compressive Loading - A Current State of the Art - Matthias Quast, Institute of Concrete Structures, Technische Universität Dresden  
10:10 - 10:30 › The effect of pulse shaping on the dynamic mechanical behavior of concrete - Alper Cankaya, Izmir Institute of Technology  
10:30 - 11:00 Coffee break and Poster Session (Craya Amphitheatre)  
11:00 - 12:20 Hopkinson bar testing facility applied to concrete (Craya Amphitheatre) - George SOLOMOS, Joint Research Centre / European Commission (Italy) ; Jacky MAZARS, Grenoble Alpes University, 3SR Lab., RV Division (France)  
11:00 - 11:20 › Identification of the tensile behaviour of brittle materials under dynamic loading using Digital Image Correlation and Virtual Fields Method - Bratislav Lukic, 3SR-RV division, Univ. Grenoble Alpes  
11:20 - 11:40 › Dynamic flexural strength of mortar - Jean-Luc Hanus, Laboratoire PRISME  
11:40 - 12:00 › Influence of fibre type on the tensile behaviour of strain-hardening cement-based composites (SHCC) under impact loading - Iurie Curosu, Technische Universität Dresden, Institute of Construction Materials  
12:00 - 12:20 › Measurement of fracture properties of concrete at high strain rates - Victor Rey de Pedraza, Departamento de Ciencia de Materiales, Universidad Politécnica de Madrid  
12:20 - 13:30 Lunch (Galilee Building)  
13:45 - 14:30 Invited Lecture (Craya Amphitheatre) - Ezio CADONI, SUPSI DYMAT (Switzerland) ; Julien BAROTH, Grenoble Alpes University, 3SR Lab., RV Division (France)  
13:45 - 14:30 › High performance concrete engineered for protective barriers - Avraham Dancygier, Faculty of Civil and Environmental Engineering, Technion – Israel Institute of Technology  
14:30 - 15:30 Dynamic testing and modelling of concrete at high strain-rates (Craya Amphitheatre) - Ezio CADONI, SUPSI DYMAT (Switzerland) ; Julien BAROTH, Grenoble Alpes University, 3SR Lab., RV Division (France)  
14:30 - 14:50 › UHPFRC under impact: experimental analysis of the mechanical response in extreme conditions and modelling using PRM model - Christophe Pontiroli, CEA Gramat  
14:50 - 15:10 › Two dynamic effects of quasi brittle failure of rocks and concrete in terms of the structural–temporal approach - Yuri Petrov, Lobachevsky State University of Nizhni Novgorod, Saint-Petersburg State University  
15:10 - 15:30 › Simplified method strategies based on damage mechanics for concrete under dynamic loadings - Jacky Mazars, 3SR-RV division, Univ. Grenoble Alpes  
15:30 - 16:00 Coffee break and Poster Session (Craya Amphitheatre)  
16:00 - 18:00 Dynamic testing of geomaterials at high strain-rates (Craya Amphitheatre) - Stephen WALLEY, University of Cambridge (United Kingdom) ; Yann MALECOT, Grenoble Alpes University, 3SR Lab., RV Division (France)  
16:00 - 16:20 › Spall experiments for determining dynamic tensile strength of rock materials - Se-Wook Oh, Chonbuk National University  
16:20 - 16:40 › Effects of strain rate and surface cracks on the mechanical behavior of Balmoral Red granite - Ahmad Mardoukhi, Tampere University of Technology  
16:40 - 17:00 › One-dimensional Response of Geological Materials to Shock Loading - Qianbing Zhang, Monash University  
17:00 - 17:20 › Combined mechanical and electrical loading for improved hard rock breaking - Marion Fourmeau, SINTEF  
17:20 - 17:40 › Tensile Strength of Granite at High Strain Rates - Mahdi Saadati, Department of Solid Mechanics, KTH Royal Institute of Technology  
17:40 - 18:00 › Study of the impact behaviour of artificial hailstone substitutes - Paul Deconinck, Thiot Ingenierie  
18:00 - 19:00 DYMAT GB2 - DYMAT Governing Board 2  
19:30 - 22:30 Banquet at the restaurant "Le Téléférique" (access by cable-car)  

Friday, October 21, 2016

Time Event  
08:45 - 09:30 Invited Lecture (Galilee Building) - Mahdi SAADATI, Atlas Copco (Sweden) ; Pascal FORQUIN, Grenoble Alpes University, 3SR Lab., RV Division (France)  
08:45 - 09:30 › Indirect Identification of Concrete Strain-Rate Effect Parameters through the Numerical Modeling of Non-traditional Experimental Tests - Gianluca Cusatis, Northwestern University, USA  
09:30 - 10:30 Modelling of brittle materials at high strain-rates (Galilee Building) - Mahdi SAADATI, Atlas Copco (Sweden) ; Emmanuel ROUBIN, Grenoble Alpes University, 3SR Lab., RV Division (France)  
09:30 - 09:50 › Numerical Simulation of Rock Dynamic Failure by Particle-Based Numerical Manifold Method - Xing Li, Monash University  
09:50 - 10:10 › Development and validation of GPU-based 3D- dynamic fracturing process analysis code for rocks subjected to impact loading - Sangho Cho, Chonbuk National University  
10:10 - 10:30 › Model generator of cancellous bone architecture : from microstructure to macroscopic behaviour - Marianne Prot, LBM/Institut de Biomecanique Humaine Georges Charpak  
10:30 - 11:00 Coffee break (Galilee Building)  
11:00 - 12:20 Brittle structures under dynamic loading (Galilee Building) - Jaap WEERHEIJM, TNO (The Netherlands) ; Eric BUZAUD, CEA-CESTA (France)  
11:00 - 11:20 › Dynamic measurement of absorbing materials - Miloslav Popovic, SVSFEM Ltd.  
11:20 - 11:40 › Experimental and numerical investigation of the damage processin RC beam-column subassemblies under a middle column removal scenario - Guo-Qiang Zhao, 3SR-RV division, Univ. Grenoble Alpes  
11:40 - 12:00 › GFRP-brick strengthening systems under high strain rates - João Pereira, Institute for Sustainability and Innovation in Structural Engineering  
12:00 - 12:20 › Soft impact of laminated glass as used for aircraft windshields - John Dear, Department of Mechanical Engineering, Imperial College London  
12:20 - 13:30 Lunch (Galilee Building)  
13:30 - 17:15 LWAG-DYMAT tour - Visit of the ESRF facilities. The shuttle will start from the conference site. The return trip will drop the participants at Grenoble City Station.  
Online user: 1